Milestone Projects

Surface Design Study





Reverse Engineered Object





Outsourced Ring






3D Printed Chess Set




Comments

Post a Comment

Popular posts from this blog

Parametric Shelf Algorithm COMPLETE!!

Image
After several weeks, I have FINALLY finished my parametric shelf design. It took several tries to figure out the right way to build the algorithm into one that created a logical form. Below I have broken down exactly what I did. POLES First I began by creating lines that rotated randomly around a single point. I made their lengths random as well. I took the end points of those lines, and used them as the centre points of the poles. The heights were also randomized.   This section gives the poles their form using circles with random radii that are extruded and capped. SHELVES At the top of each pole, using its end point, I created another line on the XY plane. Each one has a random length and a rotation. I used the end points of these lines as the centre points of the shelves.   The shelves are all made from circles with random radii. The all have the same thickness. By tweaking the range of radii as well as the range fo...
Read more

Building the Parametric Shelf

Image
It's finally time to bring this shelf to life! The bases are each in one solid piece and will be laser cut out of MDF. The planks will also be laser cut out of MDF. The poles will be 3D printed. The sections where the poles attach will be created by "etching" them with the laser cutter. We will have to do one side, then flip the board over and line it up to do the other. I think this is the best way to ensure sizes are accurate, especially since there are so many. Here are the final 3 iterations of this design: Here are some photos of the pieces being made: First the poles were printed. Here are the planks being made. We started by etching the indents on one side, then flipping the board over, etching the indents on the other side, then finally cut the pieces out. There were some issues with this method. The main one being the accuracy of the depth of the etched indents. Some indents were too deep, affecting the integrity of the MDF. Going fo...
Read more